Panasonic WV-SW352 Installation Manual page 39

Important:
• Do not move the focus ring.
• Defocus may be caused by the reinstalled enclosure. In this case, perform the auto focus func-
tion from the setup menu.
Note:
• If the zoom ring is fully rotated in the "W" direction, the periphery may become dark. In such a
case, rotate the zoom ring in the "T" direction for readjustment.
• If the zoom lock knob is slightly tightened before the zoom ring is moved, the ring will become
stable to ease the fine adjustment.
• When shooting in the following place or the following subjects, focus may not be adjusted
automatically. In this case, adjust the focus manually from the setup menu. Refer to the
Operating Instructions (PDF) for how to perform the manual focus adjustment from the setup
menu.
• Subj. moving frequently
• Subj. with large illuminance change
• Subj. with low illuminance
• Subj. with reflection or extra brightness
• Subj. through a window
• Place where the dome cover easily becomes dirty
• Subj. with less contrast such as white wall
• Subj. with heavy flicker
• If the 2x extra optical zoom is applied when "1280x960", "1280x720" (SW355) or "800x600"
(SW352) is selected for the image capture size, the image quality will be deteriorated because
the effect of Extra Optical Zoom is not provided.
• When images in the near-infrared light area change from color to black & white, out-of-focus
may be occurred according to the nature of optical property. In this case, the focus can auto-
matically be corrected by selecting "Auto" or "Preset" for "Adjusting method" on the setup
menu (The focus will not automatically be adjusted according to the illumination level change
once the focus is corrected.) Refer to the Operating Instructions (PDF) for how to set "Adjusting
method" on the setup menu.
39