Panasonic WV-SW352 Installation Manual page 42

z
Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the
provided CD-ROM.
The License Agreement will be displayed. Read the Agreement and choose "I accept the term
in the license agreement", and click "OK".
x
Click the [Network Settings] button after select-
ing the MAC address/IP address of the camera
to be configured.
Note:
• When using a DHCP server, the IP address assigned to the camera can be displayed by click-
ing the [Search] button of the IP setting software.
• When a duplicate IP address is used, the corresponding camera number will be displayed
shaded.
• When the [Access Camera] button is clicked, live images of the selected camera will be dis-
played.
• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses
in accordance with the protocol in use.
c
Complete each network setup item and click
the [Save] button.
Note:
• When selecting "DHCP" or "AutoIP", it is possi-
ble to set "DNS" to "Auto".
Important:
• It may take for around 2 minutes to complete to upload the settings to the camera after clicking
the [Save] button. The settings may be invalidated when the 12 V DC power supply is cut or
when the AC adaptor or the LAN cable is disconnected before completing the upload. In this
case, perform the settings again.
• When using a firewall (including software), allow access to all UDP ports.
42