6.3
Storing in the Hard Disk
6.3
Storing in the Hard Disk
When you store the scanned data on the hard disk, the procedures will be different depending on whether
or not a user box destination is registered in advance.
d
Reference
Refer to the following pages.
When a Box is Already Registered: page 6-10
When a Box is Not Registered: page 6-12
When a Box is Already Registered
1
Press [SCAN] tab.
2
Press [HDD].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
3
Press the Name of the user box.
% The selected destination is displayed in [List] at the left side of the screen.
% You can refine the registered address by the search function. For details, refer to page 3-7.
% You can refine the Name by using [A to Z]. For more information on how to use [A to Z], refer to
page 6-2.
% To deselect the Name, press the selected Name again.
bizhub PRESS C7000/C6000
6
6-10