6.5
Transmission to the SMB server
When an SMB server is Input Manually
1
Follow the Step 1 to 2 of "When an SMB server is Already Registered" (p. 6-20).
2
Press [Input Address].
% If you want to select the registered address, refer to page 6-20.
The Address Manual Input screen appears.
3
Press [Register Name] to enter the Name.
% The Name is automatically inputted in [Reference Name]. If you want to change the Name, press
[Reference Name] and input the Name again.
% For more information on how to input characters, refer to page 3-6.
bizhub PRESS C7000/C6000
6
6-22