Sending To The Smb Server; Items To Be Configured - Konica Minolta bizhub PRESS C6000 Scanner Manual

4.5

Sending to the SMB Server

4.5 Sending to the SMB Server
You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to the SMB
server.
The scanned data sent to the SMB server can be file-shared with computers with the SMB protocol.
For detailed information on how to operate the function, refer to page 6-20.
Copier
4.5.1

Items to be configured

In order to send the scanned data to the SMB server, the following items need to be configured.
Register Name
You specify a register name for the SMB server.
Reference Name
You specify a reference name as a keyword for searching.
Host Address
You specify an SMB server name or an IP Address of the SMB server.
File Path
You specify a directory in the SMB server.
Login Name
You specify a Login Name for the SMB server.
Password
You specify a corresponding Password to each Login Name for the SMB server.
d
Reference
You can register a Register Name, Reference Name, Host Address, File Path, Login Name, and Password
beforehand. On how to register it, refer to page 5-15.
7 CAUTION
- Depending on a network condition, transmission to the SMB server may damage the scanned data.
Make sure that the scanned data are not damaged.
bizhub PRESS C7000/C6000
Oroginal
Scan
SMB server
4
4-7