About The Scan Settings Screen - Konica Minolta bizhub PRESS C6000 Scanner Manual

6.8

About the Scan Settings Screen

6.8 About the Scan Settings Screen
Pressing [Scan Settings] on the Select Addresses screen displays the Scan Settings screen. On the Scan Set-
tings screen, such settings as original settings and quality settings can be configured.
No. Item
1 [Original Settings]
2 [Separate Scan]
3 [Image Area]
4 [Image Adjust-
ment]
5 [Zoom]
6 [Color]
7 [Color Space]
bizhub PRESS C7000/C6000
1 2 3
14 13
Description
You can set various settings on the original such as the original orientation,
bind direction, etc.
Original on multiple sheets which cannot be transmitted by ADF can be
read using the original glass.
Enable/disable [All-image] for setting the scanned range.
[All-image] Set this to scan the page as an image.
Specify the density or contrast for scanning.
It is disabled when [Black] is selected as the color mode.
You can specify various settings on zooming for scanning.
To change a zoom level, a setting is required. For more information, con-
tact your service representative.
[+][-] Specify a zoom level for scanning.
[4.00][2.00] You can specify the registered zoom level.
Specify a color mode for scanning.
[Full Color] Select this to scan in the full color mode.
[Gray Scale] Select this to scan in the gray scale mode.
[Black] Select this to scan in black and white color.
You can specify [sRGB] and [Adobe RGB] as the color space for scanning
when [Full Color] is selected as the color mode.
[sRGB] Specify sRGB as the color space for scanning.
[Adobe RGB] Specify Adobe RGB as the color space for scanning.
4 5
12 11 10 9
6
7
8
Refer-
ence page
p. 6-35
p. 6-36
p. 6-37
p. 6-37
6
6-34