Konica Minolta bizhub C35P Reference Manual page 372

Item
SNMP v1/
v2c/(IP)
SNMP v3
Configuring the Printer
Description
SNMP If Enable is selected, SNMP v1(IPX) is enabled.
v1(IPX)
Choices: Enable, Disable
Default: Enable
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
Read Specifies the community name to be used for scan-
Commu- ning.
nity Name
Range: 1 to 15 characters
Default: public
Write If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Write Specifies the community name to be used for read-
Commu- ing and writing.
nity Name
Range: 1 to 15 characters
Default: private
Context Specifies the context name.
Name
Range: Up to 63 characters
Default: [Blank]
Discovery If Enable is selected, Discovery is enabled.
Choices: Enable, Disable
Default: Enable
Discovery Specifies the user name for detection.
User
Range: 1 to 32 characters
Name
Default: public
Read User Specifies the name of read only user.
Name
Range: Up to 32 characters
Default: initial
The same name specified as the Discovery
user name cannot be used.
7-153