Konica Minolta bizhub C35P Reference Manual page 173

DEFAULT GATEWAY
Purpose
Range
Default
DHCP
Purpose
Options
Default
BOOTP
Purpose
Options
Default
ARP/PING
Purpose
Options
Default
5-6
Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
000.000.000.000
If there is a DHCP server on the network, specifies whether
the IP address and other network information is automati-
cally assigned by the DHCP server.
ON
OFF
ON
If there is a BOOTP server on the network, specifies
whether the IP address and other network information is
automatically assigned by the BOOTP server.
ON
OFF
OFF
Select whether or not the IP address is automatically
acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not automatically
acquired.
ON
OFF
OFF
Ethernet Menu