Konica Minolta bizhub C35P Reference Manual page 320

PS Settings
The Print - Default Settings - PS Settings window allows you to configure
the following items:
Item
Wait Timeout
PS Protocol
Print to PS Error
Configuring the Printer
Description
Sets Postscript timeout. "0" means that no time-out
control is effective.
Range: 0 - 300 (in seconds)
Default: 0
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION
- POSTSCRIPT - WAIT TIMEOUT
Specifies the PS protocol.
Choices: Auto, Normal, Binary
Default: Auto
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION
- POSTSCRIPT - PS PROTOCOL
Specifies whether or not error printing is performed.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
SYS DEFAULT MENU - EMULATION
- POSTSCRIPT - PS ERROR PAGE
7-101