Sending A Fax To A Combination Of Fax Numbers (Chain Dial) - Konica Minolta bizhub C20/C20X Facsimile Manual

5
Press the Start key to begin scanning and sending the fax.
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select YES,
and then press the Select key.
Sending a Fax to a Combination of Fax
Numbers (Chain Dial)
Multiple fax numbers can be combined to specify the recipients. This is called
"chain dialing".
For example, if the phone number and the extension number of a recipient
are registered as different speed dial destinations, the fax number of the
recipient can be specified by combining the two numbers.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
The document image quality can be adjusted. For details, refer to
"Adjusting the Image Quality" on page 42.
3
Press the On hook key.
4
Directly type in the first number, or select it from the favorite list or speed
dial destinations.
Refer to "Specifying a Recipient" on page 43.
5
Directly type in the second number, or select it from the favorite list or
speed dial destinations.
6
Press the Start key to begin scanning and sending the fax.
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select YES,
and then press the Select key.
56

Sending a Fax to a Combination of Fax Numbers (Chain Dial)