Speed Dialing; Registering A Speed Dial Destination - Konica Minolta bizhub C20/C20X Facsimile Manual

To return to the Fax mode screen, press the Back key until the Fax
mode screen appears, or press the Stop/Reset key.

Speed Dialing

Registering a Speed Dial Destination

Frequently specified fax numbers (maximum of 220) can be registered as
speed dial destinations. In addition, batch transmission settings can be spec-
ified.
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3
Press the + or , key to select SPEED DIAL, and then press the Select
key.
The SPEED DIAL screen appears.
4
Use the keypad to type in the speed dial number(1-220), and then press
the Select key.
If LDAP search settings have been specified, a screen allowing MAN-
UAL SETTING or LDAP SEARCH to be selected appears after the
Select key is pressed. Select
the Select key
For details on entering/editing numbers, refer to "Entering Text" on
page 97.
If the destination is already registered with the specified speed dial
number, REGISTERED! appears. Press the Back key to return to the
DIAL REGISTER screen, and then continue with step 3.
5
Enter the name of the speed dial destination to be registered, and then
press the Select key.
Text up to 20 characters long can be entered for the name.
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 97.
6
Use the keypad to enter the fax number of the recipient.
The fax number can contain a maximum of 50 characters.
For details on entering/editing numbers, refer to "Entering Text" on
page 97.
78
MANUAL SETTING
, and then press
Speed Dialing