Configuring A Network Printer For Windows 2000/Server 2003 Systems - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

3 Enter TCP/IP configuration values for the computer:
● Windows 2000/Server 2003—On the General tab in the Local Area Connection Properties
window, select Internet Protocol (TCP/IP) and click Properties.
If you are configuring a Windows server, type the IP address, default gateway address, and
subnet mask in the appropriate spaces.
If you are configuring a client, check with your Network Administrator to learn whether you should
enable automatic TCP/IP configuration or whether you should type a static IP address, default
gateway address, and subnet mask in the appropriate spaces.
4 Click OK to exit.
5 If prompted, exit Windows and restart your computer for the changes to take effect.

Configuring a Network Printer for Windows 2000/Server 2003 Systems

Set up the default printer by performing the following steps.
1 Verify that the Print Services for Unix is installed (required for LPR port availability):
● On Windows 2000, click Start, Setup, and Control Panel. Double-click the Network and
Dial-up Connections folder.
On Server 2003: Click Start, All Programs, Accessories, Communications, and open the
Network Connections folder.
● Click the Advanced menu and select Optional Networking Components.
● Select and enable Other Network File and Print Services.
● Click Details, and verify that Print Services for Unix is enabled. If not, enable it.
● Click OK, and then Next.
2 On Windows 2000, open the Printers folder (from the Desktop, click Start, Settings, and
Printers).
On Server 2003, open the Printers and Faxes folder (from the Desktop, click Start, Printers
and Faxes).
3 Double-click Add Printer. From the Add Printer Wizard welcome screen, click Next.
4 Select Local printer, and disable automatic detection for Plug and Play printer installation. Click
Next.
5 Choose Create a new port, and select LPR Port. Click Next.
150 Appendix A LPD Printing ENWW