Lpd On Windows 2000/Server 2003 Systems - HP 300X - JetDirect Print Server Administrator's Manual

LPD on Windows 2000/Server 2003
Systems
This section describes how to configure Windows systems to use the
HP Jetdirect LPD (Line Printer Daemon) services.
The process consists of two parts:
● Installing TCP/IP software (if not already installed).
● Configuring a network LPD printer.
Installing TCP/IP Software
This procedure lets you check whether you have TCP/IP installed
on your Windows system, and to install the software if necessary.
Note
1. To check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support:
Windows 2000: Click Start, Settings, Control Panel. Then
■
double-click the Network and Dial-up Connections folder.
Select the Local Area Connection for your network, then
click the File menu and select Properties.
Server 2003: Click Start, All Programs, Accessories,
■
Communications, and open the Network Connections
folder. Double-click the Local Area Connection for your
network and click Properties.
If Internet Protocol (TCP/IP) is listed and enabled in the list of
components used by this connection, the necessary software is
already installed. (Proceed to "Configuring a Network Printer for
Windows 2000/Server 2003 Systems"). if not, go to step 2.
ENWW
You may need your Windows System distribution
files or CD-ROMs to install TCP/IP components.
Configuring for LPD Printing 49