Add The Printer To Your Network Server Or System - HP 615N - JetDirect Print Server Setup Manual

Add the Printer to Your Network
Server or System
Once the printer is configured for proper operation on your network,
you can then add the printer on each computer that will send print
jobs directly to the printer. To add the printer to your system
configuration, you must use network printer installation software
for your system. For a summary of HP installation software, see
Appendix B.
Figure 2-3 Adding a Printer to Your System Configuration
For Windows systems, note the following:
Installing the printer may be easier if you use the CD-ROM that
came with your network-ready printer instead of using the HP
Jetdirect CD-ROM.
The HP Jetdirect CD-ROM does not contain printer driver
software, which must be available to install and use your printer.
The printer driver for your printer may be obtained and installed
from the following sources:
the CD-ROM supplied with your printer.
HP online support at http://www.hp.com/go/support.
the automated driver download feature of the installation
wizard on the HP Jetdirect CD-ROM (Internet access must be
active when you run the wizard).
ENWW
Installation Procedures 16