Lpd On Windows 2000/Server 2003 Systems; Installing Tcp/Ip Software - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Jetdirect print servers
Hide thumbs Also See for 635n - JetDirect IPv6/IPsec Print Server:
Table of Contents

Advertisement

lpq -Pprinter_name
where printer_name is the designated printer.
Examples (for BSD-based systems):
lpq -Ptext1
lpq -Praw1
For HP-UX systems, substitute lpstat for lpq -P to get print status.
This completes the process for configuring the HP Jetdirect print server to use LPD.

LPD on Windows 2000/Server 2003 Systems

This section describes how to configure supported Windows networks to use the HP Jetdirect LPD
(Line Printer Daemon) services.
The process consists of two parts:
Installing TCP/IP software (if not already installed).
Configuring a network LPD printer.

Installing TCP/IP Software

This procedure lets you check whether you have TCP/IP installed on a supported Windows system,
and to install the software if necessary.
NOTE
components.
1
To check whether you have Microsoft TCP/IP Printing protocol and TCP/IP printing support:
Windows 2000/Server 2003—
Windows 2000: Click Start, Settings, Control Panel. Then double-click the Network and
Dial-up Connections folder. Double-click the Local Area Connection for your network and
click Properties.
Server 2003: Click Start, All Programs, Accessories, Communications, and open the
Network Connections folder. Double-click the Local Area Connection for your network
and click Properties.
If Internet Protocol (TCP/IP) is listed and enabled in the list of components used by this
connection, the necessary software is already installed. (Proceed to
Printer for Windows 2000/Server 2003
2
If you have not previously installed the software:
Windows 2000/Server 2003—In the Local Area Connection Properties window, click
Install. In the Select Network Component Type window, select Protocol and click Add to
add the Internet Protocol (TCP/IP).
Follow the instructions on the screen.
ENWW
You may need your Windows System distribution files or CD-ROMs to install TCP/IP
Systems"). If not, go to step 2.
"Configuring a Network
LPD Setup Overview
149

Advertisement

Table of Contents
loading

This manual is also suitable for:

635n

Table of Contents