HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 36

Table 3-1 Tags Supported in a BOOTP/DHCP Boot file
Item
nodename
ht
vm
ha
ip
sm
gw
ds
lg
hn
dn
ef
na
lease-time
tr
tv
T69
T144
26 Chapter 3 TCP/IP Configuration
RFC 2132 Description
Option
-- The name of the peripheral. This name identifies an entry point to a list of parameters for
a specific peripheral. nodename must be the first field in an entry. (In the example above,
nodename is "picasso".)
--
The hardware type tag. For the HP Jetdirect print server, set this to ether (for Ethernet).
This tag must precede the ha tag.
--
The BOOTP report format tag (required). Set this parameter to rfc1048.
--
The hardware address tag. The hardware (MAC) address is the link-level, or station
address of the HP Jetdirect print server. It can be found on the HP Jetdirect configuration
page as the HARDWARE ADDRESS.
--
The IP address tag (required). This address will be the HP Jetdirect print server's IP
address.
1
The subnet mask tag. The subnet mask will be used by the HP Jetdirect print server to
identify the portions of an IP address that specify the network/subnetwork number and the
host address.
3 The gateway IP address tag. This address identifies the IP address of the default gateway
(router) that the HP Jetdirect print server will use for communications with other subnets.
6 DNS (Domain Name System) server's IP address tag. Only a single name server can be
specified.
7
The syslog server's IP address tag. It specifies the server that the HP Jetdirect print
server sends syslog messages to.
12
The host name tag. This tag does not take a value but causes the BOOTP daemon to
download the host name to the HP Jetdirect print server. The host name will be printed on
the Jetdirect configuration page, or returned on an SNMP sysName request by a network
application.
15 Domain name tag. Specifies the domain name for the HP Jetdirect print server (for
example, support.hp.com). It does not include the host name; it is not the Fully Qualified
Domain Name (such as printer1.support.hp.com).
18 Extensions file tag that specifies the relative path name of the TFTP configuration file.
NOTE
44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS). A primary and
secondary server may be specified in order of preference.
51 DHCP IP address lease duration time (seconds).
58 DHCP T1 timeout, specifying the DHCP lease renewal time (seconds).
59 DHCP T2 timeout, specifying the DHCP lease rebind time (seconds).
69 The IP address (in hexadecimal) of the preferred outgoing e-mail SMTP (Simple Mail
Transport Protocol) server, for use with supported Scan devices.
-- An HP-proprietary tag that specifies the relative path name of the TFTP configuration file.
Long path names may be truncated. The path name must be in double quotes (for
example, "pathname"). For file format information, refer to
Entries (IPv4)".
This tag is similar to the vendor-specific tag T144, described below.
"TFTP Configuration File
ENWW