Networking Tab - HP Jetdirect 310x - Print Server For Fast Ethernet User Manual

(Graphic of home page)
Host Name
System Up Time
System Contact
System Location
HP Jetdirect
Firmware Version
IP Address
Hardware Address
Admin Password
Back to start of Home page
Back to directory of all pages and features in embedded web server
Back to start of embedded web server

Networking tab

Home
Clicking on the
network status, configuration parameters, security parameters, and diagnostic
facilities for the HP Jetdirect print server.
The initial TCP/IP networking configuration page will be displayed, as illustrated
below. Other tabs across the second row at the top and other menu items in the left
column access other networking pages.
Jetdirect Home page parameters
Specifies the IP host name assigned to the device and stored
on the print server. See
The length of time since either the print server or the
network device was last power cycled.
A text string (stored on the print server) for the name of a
person to contact for this device. See
A text string (stored on the print server) that identifies the
physical location of this device. See
The product number of the HP Jetdirect print server (for
example HP J6035A).
The version of the operating instructions installed on the
HP Jetdirect print server.
The Internet Protocol address configured on the HP Jetdirect
print server. (See overview on Internet Protocol (IP) and IP
addressing.)
The hardware (LAN or MAC) address of the HP Jetdirect
print server. This unique address is assigned by
Hewlett-Packard.
Specifies whether or not an IP administrative password has
been set. If an administrative password has been set, you will
be prompted for the password to access networking
parameters, such as on the Networking pages. You can
configure or clear this password on the
page.
tab at the top of the embedded web server page accesses
TCP/IP settings.
TCP/IP
TCP/IP settings.
Admin Password
settings.