Ipsec/Firewall; Supplied Manuals; Hp Support; Hp Online Support - HP Jetdirect J7974E Administrator's Manual

IPsec/Firewall

Depending on the print server product and the printer/MFP in which it is installed, IP traffic may be
controlled (processed or discarded) by using the Internet Protocol security (IPsec, RFC 2401) or Firewall
features on the print server.
● Print servers and printers/MFPs that support IPsec may control IP traffic using both Firewall and
IPsec protection.
● If IPsec is not supported, then IP traffic may be controlled using Firewall protection.
IPsec/Firewall features provide network-layer security on both IPv4 and IPv6 networks. The Firewall
provides simple control of IP addresses that are permitted access. IPsec provides the additional security
benefits of authentication and encryption,
To help you configure the print server for IPsec/Firewall operation, a browser-based wizard is provided
that is accessed through the embedded Web server. For more information, see
Configuration

Supplied Manuals

The manuals listed below provide information on your HP Jetdirect print server.
● Start or Use guides, or equivalent printer documentation (shipped with printers that have factory-
installed HP Jetdirect print servers).
● This manual, the HP Jetdirect Print Server Administrator's Guide for the applicable HP Jetdirect
product models.

HP Support

HP Online Support

Click your way to a quick solution! The HP Web site:
http://www.hp.com/support/net_printing
is a great place to start for answers to questions about your HP Jetdirect print server—24 hours a day,
7 days a week.

Firmware Upgrades

Full-featured HP Jetdirect print servers support firmware upgrades to allow installation of new or
enhanced features. Firmware upgrade files may be downloaded and installed on the print server over
your network. If available for your print server model, firmware upgrade files may be obtained from
Hewlett-Packard at:
http://www.hp.com/go/webjetadmin_firmware
ENWW
(V.34.xx).
IPsec/Firewall
Supplied Manuals 5