Special Setting Mode Function - Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus PHOTO 2100/2200

1.3.6 Special Setting Mode Function

EEPROM AND TIMER IC RESET
By operating the panel at power-on, you can reset the EEPROM and Timer IC.
Operating procedure
Hold down the Roll paper switch and
Paper switch, and switch power on.
When the blink 2 of the Power and
Paper LEDs and the blink of all Ink
LEDs have started, release the Roll
paper switch and Paper switch and
*a
press the Paper switch.
The Power, Paper and all Ink LEDs are
lit for 1 second.
*a : If the switch is not pressed within the time when the Error LED is blinking
(for 3 seconds), the printer starts normally.
PRODUCTION DESCRIPTION
The Power and Paper LEDs
blink 2 and all Ink LEDs blink.
EEPROM and Timer IC reset
ends and the printer starts.
Functions
WASTE INK COUNTER RESET
By operating the panel at power-on, reset the counter for waste ink.
Operating procedure
Hold down the Roll paper switch and
Paper switch, and switch power on.
When the blink 2 of the Power and
Paper LEDs and the blink of all Ink
LEDs have started, release the Roll
paper switch and Paper switch and
press the Roll paper switch.
The Power, Paper and all Ink LEDs are
lit for 2 seconds.
Revision B
The Power and Paper LEDs
blink 2 and all Ink LEDs blink.
(About 10 seconds)
The Power LED, Paper LED and
all Ink LEDs are lit.
Waste ink counter reset ends and
the printer starts.
29