EPSON Stylus PHOTO 2100/2200
5.2.11 Cut Position Adjustment
This adjustment is made to correct the roll paper cut position accuracy when the Auto
cutter is fitted.
"
Perform this adjustment only when the Auto cutter of the user is
packed with the product to be repaired.
"
This adjustment can also be made from the printer driver
utility.
"
Before starting this adjustment, set the Auto cutter and roll to
the printer.
1.
From the adjustment program, click the Print button to print the check patterns.
The roll paper is transferred and the Auto cutter cuts the print patterns
automatically.
Figure 5-24. Roll Cut Position Adjustment Patterns
2.
Choose the pattern number whose cut position is the closest to the color boundary
position of each pattern, and enter it from the program. The correction value is
saved into the EEPROM.
ADJUSTMENT
5.2.12 USB ID Input
This function is executed to make this product recognizable if it is connected to the PC
via a USB hub.
1.
Select USB ID input in the adjustment program.
2.
Enter the 10-digit serial number from the label applied to the bottom side of the
Rear housing.
Adjustments
Serial number
1234567890
Figure 5-25. Serial Number
Revision B
210