Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual page 74

EPSON Stylus PHOTO 2100/2200
Printer Condition
Power
Ink Color Error -
Ink Level Low Error -
"-" : don't care
Blink : 0.5sec on + 0.5sec off repetition
Blink 2 : 0.2sec on + 0.2sec on + 0.2sec on 0.4sec off repetition
TROUBLESHOOTING
Table 3-1. Error Indications and Fault Occurrence Causes
Indicators
Paper Ink 1-7
- High speed Blink
- Blink
CAUTION: If the EPW3 shows the error,
Error Indications and Fault Occurrence Causes
EPSON Printer Window 3
printing can be continued until the
printer is placed in the ink end status.
However, you cannot perform head
cleaning operation.
High speed Blink : 0.1sec on + 0.1sec off repetition
Blink alternately 1 : 0.5sec on + 0.5sec off repetition
Blink alternately 2 : 0.5sec on + 0.5sec on repetition
Fault Occurrence Cause
This error is detected if Ink end/low occurs during
printing and the new Ink cartridge inserted for ink change
differs in color/type from the old Ink cartridge.
This error is detected if the ink consumption reaches
about 90%.
Revision B
74