Removing The Paper Eject Roller Shaft A - Epson 2200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus PHOTO 2100/2200
"
The two projections of the Spur Gear 76 should come out of the
round holes of the PF Scale.
Refer to Figure 4-130, "Applying the PF Scale".
"
Make sure that the PF Scale is not dirty and is free from
scratches.
Refer to Figure 4-130, "Applying the PF Scale".
DISASSEMBLY AND ASSEMBLY

4.2.16 Removing the Paper Eject Roller Shaft A

1. Remove the PF Roller. (Refer to 4.2.15.)
2. Remove the C Ring that secures the Combination Gear 17, 24.5 of the Left Frame,
and remove the Combination Gear 17, 24.5 from the Left Frame.
3. Remove the C Ring that secures the Spur Gear 43, and remove the Spur Gear 43
from the Paper Eject Roller Shaft A.
"
Since the Spur Gear A is a precision gear, change it for a new one
once it has been removed.
Refer to Figure 4-131, "Removing the Combination Gear 17,
24.5 and Spur Gear 43".
"
When reinstalling the Spur Gear 43 to the Paper Eject Roller
Shaft A, hold the center of the Spur Gear 43 and install the Spur
Gear 43 to the Paper Eject Roller Shaft A carefully. If you hold
the periphery of the Spur Gear 43 to mount the Gear, the Gear
will be deformed, reducing the paper loading accuracy. For
reinstallation, it is recommended to press-fit the Spur Gear 43
using the PF Scale Mounting Jig, Tool No. 1051767.
Refer to Figure 4-131, "Removing the Combination Gear 17,
24.5 and Spur Gear 43".
C Rings
Left side face
Figure 4-131. Removing the Combination Gear 17, 24.5 and Spur Gear 43
Disassembly
Revision B
Combination Gear
17, 24.5
Spur Gear 43
179