Cut Position Adjustment - Epson Stylus Pro 7700 Service Manual

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908

5.7.7 Cut Position Adjustment

Adjusts the paper position cut by the Auto Cutter.
PAPER USED
Size
Epson Stylus Pro 9700/9710/9900/9910/9890/9908:
Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/7890/7908:24 inches
Type: Premium Glossy Photo Paper (250)
STANDARD VALUE
15 ± 0.3 mm
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu
simultaneously.
→
2. Select SELF TESTING Mecha Adjustment
3. Press [OK] while [Enter] Print
The adjustment pattern will be printed.
4. Measure the distances of Home, Center and Full as shown in
Within the standard value: Turn the printer OFF and finish the adjustment.
Out of the range: Go to
5. Select Input, and enter the maximum value and the minimum value in order
among the values measured in Step
Maximum value: Select Cut Position Home and enter the value.
Minimum value: Select Cut Position Full and enter the value.
6. Return to Step 2.
ADJUSTMENT
44 inches
] + [Paper Feed ] + [OK]
→ →
Cutter Printing.
is displayed.
Figure 5-83.
Step 5.
4.
Full
Paper
feeding
direction
Other Adjustment
Center
Figure 5-83. Adjustment Pattern
Revision I
Home
425
Confidential