Adjusting The Stitch Length - Kenmore 385.19110 Owner's Manual

Adjusting theStitchLength
Press t he mode s election key_ toenter stitch
length a djusting mode.
The LED display shows "2.2" ( default setting).
Press t he Down ( -)key todecrease stitch l ength.
Press t he Up(+)key toincrease stitch length.
The stitch l ength c an bevaried f rom 0.0 to5.0.
NOTE:
The machine witl n ot s ew reverse stitches longer
than approximately 2.5mm.
2.2
1
1
I
5.0
Changing the Needle Drop Position
You can change the needle drop position of straight
stitching for patterns #01-04 and #18-21
01 02 03 04 18 19 20 21
Press the mode selection key _ to enter stitch
width adjusting mode.
The LED display shows "3.5" (default setting), which
represents the center needle position.
Press the Down (-) key to move the needle to the left.
Press the Up (+) key to move the needle to the right
_ Left needle position
_ Center needle position
_ Right needle position
0.0
3.5 7.0
®
34