Table of Contents
Advertisement
Chapter 6
Configuring Fast EtherChannel and Gigabit EtherChannel
Displaying EtherChannel Configuration Information
To display EtherChannel configuration information, perform one of these tasks in privileged mode:
Task
Display EtherChannel configuration information
by port.
Display EtherChannel configuration information
by EtherChannel administrative group.
Display EtherChannel configuration information
by EtherChannel ID.
This example shows how to display EtherChannel configuration information by port:
Console> (enable) show port channel info
Switch Frame Distribution Method: mac both
Port
----- ---------- -------------------- ----- ------- ----- ------ ----
3/5
3/6
----- ---------- -------------------- ----- ------- ----- ------ ----
Port
----- ------- ---------- ---------- ----------------- -------------
3/5
3/6
----- ------- ---------- ---------- ----------------- -------------
Port
----- ------------------------------- ------------------------- ----------------
3/5
3/6
----- ------------------------------- ------------------------- ----------------
Port
----- ------------ ------------- -----------------------------------------------
3/5
3/6
----- ------------ ------------- -----------------------------------------------
Port
----- --------------------------------------------------------------------------
3/5
3/6
----- --------------------------------------------------------------------------
Port
----- -------- -------- ------- ------------------------------------------------
3/5
3/6
----- -------- -------- ------- ------------------------------------------------
Port
----- -------- -------- --------
78-12647-02
Status
Channel
mode
connected
on
connected
on
ifIndex Oper-group Neighbor
Oper-group Method
377
1
377
1
Device-ID
069003103(5500)
069003103(5500)
Trunk-status Trunk-type
not-trunking negotiate
not-trunking negotiate
Portvlancost-vlans
Port
Portfast Port
priority
vlanpri vlanpri-vlans
32 disabled
32 disabled
IP
IPX
Group
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
Command
show port channel [mod_num[/port_num]] info
[spantree | trunk | protocol | gmrp | gvrp | qos]
show channel group [admin_group] info
[spantree | trunk | protocol | gmrp | gvrp | qos]
show channel [channel_id] info [spantree |
trunk | protocol | gmrp | gvrp | qos]
Admin Channel Speed Duplex Vlan
group id
56
835 a-100 a-full
56
835 a-100 a-full
Oper-Distribution PortSecurity/
mac both
mac both
Port-ID
3/5
3/6
Trunk-vlans
1-1005
1-1005
Port
0
0
Configuring EtherChannel
1
1
Dynamic port
Platform
WS-C4000
WS-C4000
6-9
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
