Restoring Deleted Files; Verifying A File Checksum - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Software guide
Table of Contents

Advertisement

Chapter 30
Using the Flash File System
This example shows how to permanently remove all deleted files from a Flash device:
Console> (enable) squeeze bootflash:
All deleted files will be removed, proceed (y/n) [n]? y
Squeeze operation may take a while, proceed (y/n) [n]? y
Erasing squeeze log
Console> (enable)

Restoring Deleted Files

You must specify the index number of a deleted file to identify the file to undelete. The index number
for each file appears in the first column of the dir command output. A file cannot be undeleted if a valid
file with the same name already exists. Instead, you must delete the existing file and then undelete the
desired file. A file can be deleted and undeleted up to 15 times.
To restore deleted files on a Flash device, perform this task in privileged mode:
Task
Step 1
Identify the index number of the deleted files on
the Flash device.
Step 2
Undelete a file on a Flash device.
Step 3
Verify that the file is restored.
This example shows how to restore a deleted file:
Console> (enable) dir deleted
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
6 .D ffffffff 42da7f71
1213952 bytes available (3231989 bytes used)
Console> (enable) undelete 6
Console> (enable) dir
-#- -length- -----date/time------ name
5
3231989 Jun 24 1999 12:04:40 cat4000.4-4-0-28.bin
6
1213952 bytes available (3231989 bytes used)
Console> (enable)

Verifying a File Checksum

To verify the checksum of a file on a Flash device, perform this task in privileged mode:
Task
Verify the checksum of a file on a Flash device. verify [[m/]device:] filename
This example shows how to verify the checksum of a file:
Console> (enable) verify cat4000.4-4-1.bin
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCC
File bootflash:cat4000.4-4-1.bin verified OK
Console> (enable)
78-12647-02
657a00
135 Jul 17 1999 11:30:05 dns_config.cfg
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
Command
dir [[m/]device:][filename] deleted
undelete index [[m/]device:]
dir [[m/]device:][filename]
14
135 Jul 17 1999 11:30:05 dns_config.cfg
Command
Using the Flash File System
30-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 4000 seriesCatalyst 2948gCatalyst 2980g

Table of Contents