Chapter 28
Modifying the Switch Boot Configuration
Displaying the Switch Boot Configuration
To display the current configuration register, BOOT environment variable, and CONFIG_FILE
environment variable settings, perform this task in privileged mode:
Task
Display the current configuration register, BOOT
environment variable, and CONFIG_FILE
environment variable settings.
This example shows how to display the current configuration register, BOOT environment variable, and
CONFIG_FILE environment variable settings:
Console> (enable) show boot
BOOT variable = bootflash:cat4000.5-2-1.bin,1;
CONFIG_FILE variable = bootflash:generic.cfg;bootflash:4003_1_noc.cfg
Configuration register is 0x12f
ignore-config: disabled
auto-config: recurring
console baud: 9600
boot: image specified by the boot system commands
Console> (enable)
78-12647-02
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
Displaying the Switch Boot Configuration
Command
show boot [mod_num]
28-9