Using Ping; Understanding How Ping Works - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Software guide
Table of Contents

Advertisement

Using Ping

This example shows how to display information about user sessions using the noalias keyword to display
the IP addresses of connected hosts:
Console> (enable) show users noalias
Session
-------- ---------------- -------------------------
console
telnet
* telnet
Console> (enable)
To disconnect an active user session, perform this task in privileged mode:
Task
Disconnect an active user session on the switch.
This example shows how to disconnect an active console port session and an active Telnet session:
Console> (enable) show users
Session
-------- ---------------- -------------------------
console
telnet
telnet
* telnet
Console> (enable) disconnect console
Console session disconnected.
Console> (enable) disconnect tim-nt.bigcorp.com
Telnet session from tim-nt.bigcorp.com disconnected. (1)
Console> (enable) show users
Session
-------- ---------------- -------------------------
telnet
* telnet
Console> (enable)
Using Ping
These sections describe how to use IP ping:

Understanding How Ping Works

You can use IP ping to test connectivity to remote hosts. If you attempt to ping a host in a different IP
subnetwork, you must define a static route to the network or configure a router to route between those
subnets.
The ping command is configurable from normal executive and privileged executive mode. In normal
executive mode, the ping command supports the -s parameter, which allows you to specify the packet
size and packet count. In privileged executive mode, the ping command allows you to specify the packet
size, packet count, and the wait time.
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
19-8
User
User
sam
jake
tim
suzy
User
jake
suzy
Understanding How Ping Works, page 19-8
Executing Ping, page 19-9
Location
10.10.10.12
10.10.20.46
Command
disconnect {console | ip_addr}
Location
jake-mac.bigcorp.com
tim-nt.bigcorp.com
suzy-pc.bigcorp.com
Location
jake-mac.bigcorp.com
suzy-pc.bigcorp.com
Chapter 19
Checking Port Status and Connectivity
78-12647-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 4000 seriesCatalyst 2948gCatalyst 2980g

Table of Contents