Setting The X/Y Variable Zoom Ratio - Konica Minolta bizhub 215 User Manual

4.6 Specifying the zoom ratio to copy the original
4.6.5

Setting the X/Y variable zoom ratio

1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Press Function.
The copy function screen appears.
3
Use +, to select [X/Y ZOOM], then press OK.
4
Use +, to select [ON], then press ).
5
Use the Keypad to specify the zoom ratio in the length direction (X), then press OK.
To correct the entered zoom ratio, press Clear/Stop, and configure the setting again.
6
Use the Keypad to specify the zoom ratio in the width direction (Y), then press OK.
To correct the entered zoom ratio, press Clear/Stop, and configure the setting again.
7
Press Back to return to the basic screen.
8
Configure other desired settings.
% For details on the basic functions, refer to page 3-2.
% For details on the Application, refer to page 5-2.
9
Press the Start key.
Tips
- The X/Y variable zoom ratio setting and the auto paper setting, the mixed original setting, the ID copy
setting, or the 2 in 1/4 in 1 copy setting cannot be set at the same time.
bizhub 215
4
4-21