Utility - Konica Minolta bizhub 215 User Manual

6.1

Utility

6 Utility and Copy Settings
6.1 Utility
The Utility screen provides 13 setting items.
No. Name
1 [MACHINE SETTING]
2 [PAPER SOURCE SET-
UP]
3 [CUSTOM SIZE MEMO-
RY]
4 [DRUM DEHUMIDIFY]
5 [ADMIN. MANAGE-
MENT]
6 [COPY SETTING 1]
7 [COPY SETTING 2]
8 [DIAL REGISTRATION]
9 [FAX REGISTRATION]
10 [FAX TX OPERATION]
11 [FAX RX OPERATION]
12 [REPORTING]
13 [SCAN SETTING]
Tips
- Some items cannot be configured depending on which optional device is installed in this machine. If an
unavailable item is selected, an error message appears.
bizhub 215
Description
Configure the settings for the operating environment
of this machine.
Specify the size and type of the paper loaded in Tray 1.
You can also specify the unit of paper size and paper
type loaded in Tray2-Tray5.
Register up to two custom sizes.
Perform maintenance operations to prevent a function
reduction.
Configure the remote monitor settings or settings for
the administrator to manage each account.
Configure the default settings for each copy function.
This item is available if the optional Fax Kit FK-510,
Image Controller IC-209, or Network Card NC-504
is installed. For details, refer to [User's Guide Fax Op-
erations] [User's Guide Network Scan Operations].
This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations].
This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations].
This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations].
This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations].
This item is available if an optional Image Controller
IC-209 or Network Card NC-504 is installed in this
machine. For details, refer to [User's Guide Network
Scan Operations].
6
Page
p. 6-4
p. 6-9
p. 6-12
p. 6-14
p. 6-16
p. 6-21
p. 6-28
-
-
-
-
-
-
6-2