Selecting The Tray - Konica Minolta bizhub 215 User Manual

4.3

Selecting the tray

4.3 Selecting the tray
1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Select Paper.
3
Use +, to select [AUTO] or one of the trays, then press OK.
The screen returns to the basic screen.
% By selecting [TRAY1] and pressing ), you can specify the size, unit, and type of paper.
% By selecting one of the trays from [TRAY2] to [TRAY5] and pressing ), you can specify the unit of
the paper size and paper type.
4
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
5
Press the Start key.
Tips
- If [NO SUITABLE PAPER] appears on the Display after you select [AUTO] and press Start, appropriate
paper is not loaded in the tray. Load paper of the appropriate size or select one of the trays, then press
Start again.
- The auto zoom setting and the auto paper setting, the manual zoom setting, the book separation copy
setting, or the ID copy setting cannot be selected at the same time.
bizhub 215
4
4-7