Setting The Cifs Server And Authentication Properties - Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION Manual

Browse and select it from the object selector
or
Use the object history button to select it.
5 Verify the status of the server. If the CIFS server is stopped, click Start to start the CIFS server.
The Status changes to Running and all the CIFS properties are displayed on the screen.
If a Samba server is running, CIFS does not start. To resolve this problem, see
running with Samba" on page
6 Continue with other administrative actions as necessary:
Section 5.1.3, "Setting the CIFS Server and Authentication Properties," on page 33
Section 5.1.4, "Managing CIFS Shares," on page 37
Section 5.1.5, "Configuring a CIFS User Context," on page 41

5.1.3 Setting the CIFS Server and Authentication Properties

The server and authentication parameters can be set by using the parameters listed under the
General and Share tabs on the default CIFS server page in the iManager.
For information on starting iManager and accessing the CIFS server, see
Server to Manage," on page
To change these parameters from command line, see
Configuration," on page 43
"Setting CIFS General Server Parameters" on page 33
"Enabling and Disabling SMB Signing" on page 35
"Setting CIFS General Authentication Parameters" on page 35
Setting CIFS General Server Parameters
The General page contains the Server and Authentication properties tabs. By default, the Server
Properties page is displayed. View or edit the server parameters on this page.
67.
32.
Section 5.2.4, "Modifying the CIFS
"CIFS is not
Section 5.1.2, "Selecting a
Administering the CIFS Server 33