Novell NETWARE 6-DOCUMENTATION Manual page 571

18
Novell iFolder Administration Guide
admin to have rights to administer the Server Management Console, you
would enter admin;jsmith.
21
If prompted, enter the IP address or the DNS name of your server and then
click Next.
22
Click Finish to complete the installation.
23
Do one of the following:
If you are using only one IP address, to start Novell iFolder you can
reboot your server (this will run the edited AUTOEXEC.NCF) or
enter the following commands at the server console:
search add sys:\Apache
search add sys:\Apache\iFolder\Server
STARTIFOLDER
If you are using two IP addresses, edit the AUTOEXEC.NCF file and
enter the following lines after the search add
sys:\Apache\iFolder\Server command line:
set command line prompt default choice=on
set command line prompt time out=60
Also enter ? in front of the STARTIFOLDER command line.
Once you have edited the AUTOEXEC.NCF, to start Novell iFolder
you can reboot your server (this will run the edited
AUTOEXEC.NCF) or enter the following commands at the server
console:
search add sys:\Apache
search add sys:\Apache\iFolder\Server
STARTIFOLDER
Novell iFolder is now installed on your NetWare 5.1 server. To learn more
about Novell iFolder, go to Chapter 6, "Using Novell iFolder," on page 37.