Novell LINUX ENTERPRISE SERVER 11 - ADMINISTRATION Administration Manual page 340

Procedure 23.1 Connecting to a Wireless Network
1 To connect to a wireless network, left-click the applet icon and choose en entry
2 If the network is encrypted, a dialog opens. Choose the type of Wireless Security
3 To connect to a network that does not broadcast its service set identifier (ESSID)
4 In the dialog that opens, enter the ESSID and set encryption parameters if neces-
5 To disable wireless networking, right-click the applet icon and uncheck Enable
23.5.3 Configuring Your Wireless Card as an
If your wireless card supports access point mode, you can use NetworkManager for
configuration.
1 Click Create New Wireless Network.
326 Administration Guide
from the list of available wireless networks.
the network uses and enter the appropriate Password.
and therefore cannot be detected automatically, left-click the NetworkManager
icon and choose Connect to Other Wireless Network.
sary.
Wireless. This can be very useful if you are on a plane or in any other environment
where wireless networking is not allowed.
Access Point