Novell LINUX ENTERPRISE SERVER 11 - ADMINISTRATION Administration Manual page 106

Graphical Menu File
Path to the graphics file used when displaying the boot screen.
Serial Connection Parameters
If your machine is controlled via a serial console, you can specify which COM port
to use at which speed. Also set Terminal Definition to "serial". See info grub
or
details.
Terminal Definition
If you are booting via serial console, enter "serial" here, otherwise leave blank.
You also need to specify Serial Connection Parameters in this case.
8.2.7 Changing Boot Loader Type
Set the boot loader type in Boot Loader Installation. The default boot loader in SUSE
Linux Enterprise Server is GRUB. To use LILO, proceed as follows:
Procedure 8.6 Changing the Boot Loader Type
1 Select the Boot Loader Installation tab.
2 For Boot Loader, select LILO.
3 In the dialog box that opens, select one of the following actions:
92 Administration Guide
http://www.gnu.org/software/grub/manual/grub.html
Propose New Configuration
Have YaST propose a new configuration.
Convert Current Configuration
Have YaST convert the current configuration. When converting the configu-
ration, some settings may be lost.
Start New Configuration from Scratch
Write a custom configuration. This action is not available during the instal-
lation of SUSE Linux Enterprise Server.
Read Configuration Saved on Disk
Load your own /etc/lilo.conf. This action is not available during the
installation of SUSE Linux Enterprise Server.
for