Novell LINUX ENTERPRISE SERVER 11 - ADMINISTRATION Administration Manual page 319

Card Selection
In the first step, YaST looks for the network interfaces available on your system,
then displays them in a list. From the list, select the interface on which the DHCP
server should listen and click Add. After this, select Open Firewall for Selected
Interfaces to open the firewall for this interface. See
Card Selection" (page 305).
Figure 22.1 DHCP Server: Card Selection
Global Settings
Use the check box to determine whether your DHCP settings should be automati-
cally stored by an LDAP server. In the entry fields, provide the network specifics
for all clients the DHCP server should manage. These specifics are the domain
name, address of a time server, addresses of the primary and secondary name
server, addresses of a print and a WINS server (for a mixed network with both
Windows and Linux clients), gateway address, and lease time. See
"DHCP Server: Global Settings"
Figure 22.1, "DHCP Server:
(page 306).
Figure 22.2,
DHCP 305