Novell LINUX ENTERPRISE SERVER 11 - ADMINISTRATION Administration Manual page 268

Example 17.12 Output of the route -n Command
route -n
Kernel IP routing table
Destination
10.20.0.0
link-local
loopback
default
For more options and information about using route, enter route -h or see the route
(8) man page.
17.6.3 Start-Up Scripts
Apart from the configuration files described above, there are also various scripts that
load the network programs while the machine is booting. These are started as soon as
the system is switched to one of the multiuser runlevels. Some of these scripts are de-
scribed in
Table 17.9
/etc/init.d/network
/etc/init.d/xinetd
/etc/init.d/portmap
/etc/init.d/nfsserver
/etc/init.d/postfix
/etc/init.d/ypserv
254 Administration Guide
Gateway
*
*
*
styx.exam.com
Table 17.9, "Some Start-Up Scripts for Network Programs"
Some Start-Up Scripts for Network Programs
Genmask Flags
255.255.248.0 U
255.255.0.0 U
255.0.0.0 U
0.0.0.0 UG
This script handles the configuration of the net-
work interfaces. If the network service was not
started, no network interfaces are implemented.
Starts xinetd. xinetd can be used to make server
services available on the system. For example, it
can start vsftpd whenever an FTP connection is
initiated.
Starts the portmapper needed for the RPC server,
such as an NFS server.
Starts the NFS server.
Controls the postfix process.
Starts the NIS server.
MSS Window irtt Iface
0 0 0 eth0
0 0 0 eth0
0 0 0 lo
0 0 0 eth0
(page 254).