Novell LINUX ENTERPRISE SERVER 11 - ADMINISTRATION Administration Manual page 105

8.2.5 Adjusting the Disk Order
If your computer has more than one hard disk, you can specify the boot sequence of
the disks to match the BIOS setup of the machine (see
vice.map" (page 85)). To do so, proceed as follows:
Procedure 8.5 Setting the Disk Order
1 Open the Boot Loader Installation tab.
2 Click Boot Loader Installation Details.
3 If more than one disk is listed, select a disk and click Up or Down to reorder the
displayed disks.
4 Click OK to save the changes.
5 Click Finish to save the changes.
8.2.6 Configuring Advanced Options
Advanced boot options can be configured via Boot Loader Installation > Boot Loader
Options. Normally, it should not be necessary to change the default settings.
Set Active Flag in Partition Table for Boot Partition
Activates the partition that contains the boot loader. Some legacy operating systems
(such as Windows 98) can only boot from an active partition.
Debugging Flag
Sets GRUB in debug mode where it displays messages to show disk activity.
Write Generic Boot Code to MBR
Replaces the current MBR with generic, operating system independent code.
Hide Boot Menu
Hides the boot menu and boots the default entry.
Use Trusted GRUB
Starts the Trusted GRUB which supports trusted computing functionality.
Section 8.1.2, "The File de-
The Boot Loader GRUB 91