Power Management Setup - JETWAY 865GFTR3A User Manual

be displayed on the screen: "EPP Mode Select." At this time either EPP 1.7 spec. or EPP 1.9
spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
ACPI Function
ACPI Suspend Type
Power Management
Video off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
x USB KB Wake-Up From S3
Resume by Alarm
x Date (of Month)
x Time (hh:mm:ss)
CPU Thermal Management Timer
> PM Timer Reload Events
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off in Suspend
This determines the manner in which the monitor is blanked. The choice are Yes → Video
will off , and No→ Video always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The
settings are: Delay 4 Sec, Instant-Off.
Wake-Up by PCI card /Power On by Ring
Power Management Setup
Enabled
S1(POS)
User Define
V/H SYNC+Blank
Yes
Stop Grant
3
Disabled
Disabled
Instant-off
Disabled
Disabled
Disabled
Disabled
0
0 : 0 :0
32 Min
Press Enter
F6:Optimized Defaults
Initial display power management signaling.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
30
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults