Pc Health Status - JETWAY 865GFTR3A User Manual

IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Shutdown Temperature
Show PC Health in Post
CPUFAN Smart Mode
CPUFAN Temp1 Value
CPUFAN Speed below Temp1
CPUFAN Temp2 Value
CPUFAN Speed below Temp2
SYSFAN Smart Mode
SYSFAN Temp1 Value
SYSFAN Speed below Temp1
SYSFAN Temp2 Value
SYSFAN Speed below Temp2
Current CPU Temperature
Current System Temperature
Current CPUFAN Speed
Current SYSFAN Speed
Vcore
Vcc3.3
+5V
Vdd 1.5
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
CPUFAN/SYSFAN Smart Mode
Enabled this item can let users setting CPUFAN/SYSFAN Speed when the CPU/System
temperature below the temperature value of BIOS Setting.
CPUFAN/SYSFAN Temp1/Temp2 Value
This item allow users setting the temperature value of CPU/SYSTEM for FAN speed
controller change the FAN speed the setting are 30°C∼100°C.
CPUFAN/SYSFAN Speed below Temp1/Temp2
This item allow the FAN work in 50%, 60%, 70%, 80%, 90%, 100% of full speed when the
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
PC Health Status
Disabled
Enabled
Enabled
40 ° C
50%
45 ° C
80%
Enabled
40 ° C
50%
45 ° C
80%
38 ° C
25 ° C
5000 rpm
5000 rpm
1.51V
3.31V
4.98V
1.53V
F6:Optimized Defaults
33
Menu Level >>
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults