Specification - JETWAY 865GFTR3A User Manual

1-3 Specification

Spec
Design
Chipset
CPU Socket
(mPGA478B Socket)
Memory Socket
Expansion Slot &
Headers
Integrate IDE
Integrate Serial ATA
1394 Port
LAN On Board
Integrate VGA
Audio
BIOS
Multi I/O
∗ ATX form factor 6 layers PCB size: 18.5x25.5cm
∗ Intel 865G Graphics Memory Controller Hub (GMCH)
∗ Intel 82801EB I/O Controller Hub (ICH5) Chipset
∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗ Support CPU Frequency 400MHz/533MHz/800MHz
∗ Support 1.5G∼3.4G 478 Pin Pentium 4 processor, Support
Hyper Threading
∗ Reserves support for future Intel Pentium 4 processors
∗ 184-pin DDR SDRAM module socket x2
∗ Support Dual Channel DDR200/DDR266/DDR333/DDR400
DDR SDRAM
∗ Expandable to 2.0GB
∗ AGP slot x1 for AGP 0.8V/1.5V standard only, compliant to
AGP 2.0/3.0 standard support AGP 4X/8X mode
∗ 32-bit PCI slot x 1
∗ Two PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100 functions that
deliver the data transfer rate up to 100 MB/s
∗ Two Serial ATA Host controllers, that deliver the data transfer
rate up to 150 MB/s
∗ VIA VT6307S 1394 Controller chip provided two 1394 device
ports support 100/200/400Mb bandwidth
∗ Compliant with IEEE 1394A-2000 standard
∗ Realtek RTL8110S PCI Giga LAN Controller chip
∗ Supports 10/100/1000 Mb/sec data transfer rate
∗ Integrated High Performance & High Quality 3D Accelerator
∗ Support Ultra-AGPII with 2GB/s bandwidth
∗ Built-in programmable 24-bit true-color RAMDAC up to
333MHz pixel clock.
∗ Realtek ALC 655 6-channel AC97' Codec integrated
∗ SPDIF-In/ SPDIF-Out Optical support
∗ Audio driver and utility included
∗ Award 4MB Flash ROM
∗ PS/2 keyboard and PS/2 mouse connectors
∗ Floppy disk drive connector x1
∗ Parallel port x1, Serial port x2
∗ USB 2.0 connector x4, USB 2.0 headers x4
∗ Audio connector Line-in, Line-out, MIC
Description
3