1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. 866ASUR2A
  6. User manual

JETWAY 866ASUR2A User Manual

M/b for socket-a athlon/duron processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
866AS ULTRA/866AS ULTRA RAID
USER'S MANUAL
M/B For Socket-A Athlon/Duron Processor
NO. G03-866ASUR2A
Release date: November 2001
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

Table of Contents
loading

Related Manuals for JETWAY 866ASUR2A

Summary of Contents for JETWAY 866ASUR2A

  • Page 1 866AS ULTRA/866AS ULTRA RAID USER'S MANUAL M/B For Socket-A Athlon/Duron Processor NO. G03-866ASUR2A Release date: November 2001 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE ................1 MANUAL REVISION INFORMATION ..........2 COOLING SOLUTIONS ..............2 CHAPTER 1 INTRODUCTION OF 866AS ULTRA/ 866AS ULTRA RAID MOTHERBOARD 1-1 FEATURE OF MOTHERBOARD ..........3 1-2 SPECIFICATION ..............4 1-3 PERFORMANCE LIST............. 5 1-4 LAYOUT DIAGRAM &...
  • Page 3 3-8 POWER MANAGEMENT SETUP..........34 3-8-1 WAKE UP EVENTS............35 3-8-1.1 IRQS ACTIVITIES........... 3-9 PNP/PCI CONFIGURATION SETUP .......... 36 3-9-1 IRQ RESOURCES ............37 3-10 PC HEALTH STATUS ............. 38 3-11 MISCELLANEOUS CONTROL..........39 3-12 LOAD STANDARD/OPTIMIZED DEFAULTS ......40 3-13 SET SUPERVISOR/USER PASSWORD ........

  • Page 4: User's Notice

    USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER.

  • Page 5: Manual Revision Information

    Manual Revision Information Reversion Revision History Date Second Edition November 2001 Item Checklist 866AS ULTRA/ 866AS ULTRA RAID Cable for IDE/Floppy CD for motherboard utilities ¡ ¼ Cable for USB Port 3/4 (Option) ¡ ¼ Cable for IDE RAID (only for 866AS ULTRA RAID) 866AS ULTRA/ 866AS ULTRA RAID User’s Manual AMD Athlon™...

  • Page 6: Motherboard

    Chapter 1 Introduction of 866AS ULTRA /866AS ULTRA RAID Motherboard 1-1 Feature of motherboard The 866AS ULTRA /866AS ULTRA RAID motherboard is design for use AMD Athlon/Duron 200MHZ /266MHz (Double Data Rate) Front Side Bus Frequency CPU, which utilize the Socket-A design and the memory size expandable to 3.0GB. This motherboard use the newest VIA KT266A chipset which provides better performance than KT266 chipset, whose 133MHz/266MHz (Double Data Rate) Front Side Bus frequency and 266MHz memory interface delivers a clear upgrade...

  • Page 7: Specification

    1-2 Specification Spec Description ∗ ATX form factor 4 layers PCB size: 30.5x24.4cm Design ∗ VIA KT266A/VT8233 Chipset Chipset ∗ PROMISE PDC20265R IDE RAID chip for 866AS ULTRA RAID only ∗ Support AMD Athlon 700MHz∼1.533GHz processor CPU Socket ∗ Support AMD Duron 600MHz∼1.1GHz processor ∗...

  • Page 8: Performance List

    1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU:...

  • Page 9: Layout Diagram & Jumper Setting

    1-4 Layout Diagram & Jumper Setting PRINT GAME/MIDI PORT PS/2 MOUSE PS/2 Keyboard LINE-IN COM1 COM2 LINE-OUT ATX Power Connector CPU FAN K/B Power ON Jumper (JP1) CPU Socket PC1600/PC2100 PC99 Back Panel DDRX2 VIA KT266A Chip ATA 100 IDE Connector Front Panel Audio FAN2...

  • Page 10: Expansion Sockets

    Jumpers Jumper Name Description Page CPU Ratio Selector 10-pin Block CPU Front Side Bus Frequency OFF : 133MHz /266MHz ON : 100MHz /200MHz JBAT CMOS RAM Clear 3-pin Block Keyboard Power On Enable/Disabled 3-pin Block ATA 100/RAID Mode Selector P.10 3-pin Block ( for 866AS ULTRA RAID) Connectors Connector...

  • Page 11: Chapter 2 Hardware Installation

    Chapter 2 Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard setting 2. Install CPU 3. Install Memory 4. Install Expansion cards 5. Connect Ribbon cables, Panel wires, and power supply 6.
  • Page 12 2. CPU Front Side Bus Frequency Setting (2-pin) : JP4 ON : 100MHz OFF : 133MHz (Default) CPU Front Side Bus Frequency Setting Note: CPU Front Side Bus Frequency also can setting step by step in BIOS SETUP, please refer page Miscellaneous Control in Host Clock at Next.

  • Page 13: Install Cpu

    1-2 closed K/B Power ON Disable 2-3 closed K/B Power ON Enabled (Default) Keyboard Power On Setting 5. ATA100/RAID Mode Selector: J6 (Only for 866AS ULTRA RAID) When J6 1-2 closed the IDE3 & IDE4 are setting in ATA100 Mode supports Ultra DMA 100MB/sec transfer rate.

  • Page 14: About Amd Athlon & Duron 462-Pin Cpu

    Serial Port - a low speed interface typically used for mouse and external modems. Parallel Port - a low speed interface typically used for printers. PS/2 - a low speed interface used for mouse and keyboards. USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards, scanners, scanners, and some digital cameras.

  • Page 15: Install Memory

    Socket-A Colden Arrow  CPU ZIF Socket-A When you put the CPU into the ZIF socket. No force require to insert of the CPU, then press the level to Locate position slightly without any extra force. 2-4 Install Memory This motherboard provides three 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites for memory expansion available from minimum memory size of 64MB to maximum memory size of 3.0GB DDR SDRAM.

  • Page 16: Expansion Card

    WARNING! For the DDR SDRAM CLOCK is set at 133MHz, use only PC2100-compliant DDR Modules. When this motherboard operate at 133Mhz, most system will not even boot if non-compliant modules are used because of the strict timing issues, if your DDR Modules are not PC266-compliant, set the DDR SDRAM clock to 100MHz to ensure system stability.

  • Page 17: Interrupt Request Table For This Motherboard

    2-5-3 Interrupt Request Table For This Motherboard Interrupt request are shared as shown the table below: INT A INT B INT C INT D PCI slot 1 Shared       PCI slot 2 Shared PCI slot 3 ...

  • Page 18: Connectors, Headers

    2-6 Connectors, Headers 2-6-1 Connectors Power Connector (20-pin block) : ATXPOWER ATX Power Supply connector. This is a new defined 20-pins connector that usually comes with ATX case. The ATX Power Supply allows to use soft power on momentary switch that connect from the front panel switch to 2-pins Power On jumper pole on the motherboard.
  • Page 19 PS/2 MOUSE PRINT GAME/MIDI PORT PS/2 LINE-IN Keyboard USB COM1 COM2 LINE-OUT Floppy drive Connector (34-pin block): FDD This connector supports the provided floppy drive ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to the floppy drives.
  • Page 20 Secondary IDE Connector (40-pin block): IDE2 This connector connects to the next set of Master and Slave hard disks. Follow the same procedure described for the primary IDE connector. You may also configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector.

  • Page 21: Headers

    2-6-2 Headers Line-In/Out, MIC Header (9-pin): AUDIO This header connect to Front Panel Line-In, Line-out, MIC connector with cable. Pin 1 AUDIO L-IN-R L-IN-L MICP L-OUT-L L-OUT-R Line-In/Out, MIC Headers USB Port Headers (9-pin) : USB1, USB2 These headers are used for connecting the additional USB port plug. By attaching an option USB cable, your can be provided with two additional USB plugs affixed to the back panel.
  • Page 22 Speaker connector: SPEAKER This 4-pin connector connects to the case-mounted speaker. See the figure below. Power LED: PWR LED The Power LED is light on while the system power is on. Connect the Power LED from the system case to this pin. Power switch: PW BN This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.
  • Page 23 CPUFAN FAN2 FAN1 (11) IR infrared module Headers (9-pin) : IR This connector supports the optional wireless transmitting and receiving infrared module. You must configure the setting through the BIOS setup to use the IR function. IR: (Pin1 ∼ Pin5) for Standard IR CIR: (Pin6 ∼...

  • Page 24: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 25: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 26: Getting Help

    3-2 Getting Help Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu/Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.

  • Page 27: Standard Cmos Features

    Integrated Peripherals Use this menu to specify your settings for integrated peripherals. Power Management Setup Use this menu to specify your settings for power management. PnP/PCI configurations This entry appears if your system supports PnP/PCI. PC Health Status This entry shows your PC health status. Miscellaneous Control Use this menu to specify your settings for Miscellaneous control.
  • Page 28 CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Standard CMOS Features Date (mm:dd:yy) Thu, Jul, 05 2001 Item Help Time (hh:mm:ss) 11 : 33 : 50 > IDE Primary Master Press Enter None Menu Level > > IDE Primary Slave Press Enter None >...

  • Page 29: Advanced Bios Features

    3-5 Advanced BIOS Features CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Advanced BIOS Features Anti-Virus Protection Disabled Item Help Recovery Genius Enabled PhoneixNet Support Disabled CPU L1 Cache Enabled Menu Level > CPU L2 Cache Enabled Quick Power On Self Test Enabled ATA &...
  • Page 30 Quick Power On Self-Test This category speeds up Power On Self Test (POST) after you power on the computer. If this is set to Enabled. BIOS will shorten or skip some check items during POST. Enabled (default) Enable quick POST Disabled Normal POST First/Second/Third/Fourth Boot Device...

  • Page 31: Advanced Chipset Features

    3-6 Advanced Chipset Features The Advanced Chipset Features Setup option is used to change the values of the chipset registers. These registers control most of the system options in the computer. CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Advanced Chipset Features >...

  • Page 32: Dram Timing Settings

    3-6-1 DRAM Timing Settings CMOS Setup Utility – Copyright(C) 1984-2001 Award Software DRAM Timing Settings Auto Configuration Optimized Item Help RAS Active Time RAS Precharge Time RAS to CAS Delay Menu Level >> CAS Latency 2.5T Bank Interleave 4 Bank DRAM Command Rate 2T Command ¡...

  • Page 33: Pci Timing Settings

    3-6-3 PCI Timing Settings CMOS Setup Utility – Copyright(C) 1984-2001 Award Software PCI Timing Settings Item Help PCI Master 1 WS Write Disabled PCI Master 1 WS Read Disabled CPU to AGP Post Write Disabled Menu Level >> PCI Delay Transaction Disabled ¡...

  • Page 34: Onchip Ide Function

    3-7-1 OnChip IDE Function CMOS Setup Utility – Copyright(C) 1984-2001 Award Software OnChip IDE Function OnChip IDE Channel0 Enabled Item Help OnChip IDE Channel1 Enabled Primary Master Auto Primary Slave Auto Menu Level >> Secondary Master PIO Auto Secondary Slave Auto Primary Master UDMA...

  • Page 35: Onchip Device Function

    3-7-2 OnChip Device Function CMOS Setup Utility – Copyright(C) 1984-2001 Award Software OnChip Device Function AC97 Sound Device Auto Item Help Game Port Address Midi Port Address Disabled Midi Port IRQ Menu Level >> AC97 Modem Device Auto USB Host Controller Enabled USB Keyboard Legacy Support Disabled...
  • Page 36 Onboard FDD Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. The settings are: Enabled and Disabled. Onboard Serial Port 1/Port 2 Select an address and corresponding interrupt for the first and the second serial ports.

  • Page 37: Power Management Setup

    3-8 Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Power Management Setup ACPI Function Enabled...

  • Page 38: Wake Up Events

    3-8-1 Wake up Events CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Wake Up Events Item Help LPT & COM LPT/COM HDD & FDD PCI Master Menu Level >> Wake-Up on Ring Disabled Wake-Up on PCI PME Disabled PS2 KB Wakeup Selection Hot Key Wake-Up On Hot Key (PS2 KB) Disabled...

  • Page 39: 3-8-1.1 Irqs Activities

    3-8-1.1 IRQs Activities CMOS Setup Utility – Copyright(C) 1984-2001 Award Software IRQs Activities Primary INTR Item Help IRQ3 (COM 2) Enabled IRQ4 (COM 1) Enabled IRQ5 (LPT 2) Enabled Menu Level >>> IRQ6 (Floppy Disk) Enabled IRQ7 (LPT 1) Enabled IRQ8 (RTC Alarm) Disabled...

  • Page 40: Irq Resources

    Reset Configuration Data Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. The settings are: Enabled and Disabled.

  • Page 41: Pc Health Status

    3-10 PC Health Status This section shows the Status of you CPU, Fan, Warning for overall system status. This is only available if there is Hardware Monitor onboard. CMOS Setup Utility – Copyright(C) 1984-2001 Award Software PC Health Status Shutdown Temperature Disabled Item Help Show PC Health in Post...

  • Page 42: Miscellaneous Control

    3-11 Miscellaneous Control This section is for setting CPU Frequency/Voltage Control. CMOS Setup Utility – Copyright(C) 1984-2001 Award Software Miscellaneous Control Auto Detect DIMM/PCI Clk Enabled Item Help Spread Spectrum Disabled ** Current Host Clock is Host Clock at Next Boot is 100MHz Menu Level >...

  • Page 43: Load Standard/Optimized Defaults

    3-12 Load Standard/Optimized Defaults Load Standard Defaults When you press <Enter> on this item, you get confirmation dialog box with a message similar to: Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations.

  • Page 44: Chapter 4 Driver & Free Program Installation

    Chapter 4 DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.

  • Page 45: Via 4 In

    From MAGIC INSTALL MENU you may make 11 selections: 1. VIA 4 IN 1 install VIA Service Pack 4 IN 1 driver 2. SOUND install AC97 Audio Codec Installing driver 3. ATA100 install Promise ATA 100 Controller driver (for 866AS ULTRA RAID only) 4.
  • Page 46 appears appears 3. This is to announce the Copy Write, 4. Click NEXT to choose all driver click Yes 5. Click NEXT to Install ATAPI Vender 6. Click NEXT to choose enabled DMA Support Driver Mode 7. Click NEXT to Install VIA AGP VXD 8.

  • Page 47: For Editing/Playback

    9. Click Finish to restart computer 4-2 AC97 sound driver and the program Install for editing/playback 1. Click SOUND when MAGIC INSTALL 2. Then auto detect operation system MENU appears language edition, click OK, start to install DRIVER 3. When ask Remove old device driver, 4.

  • Page 48: Install Promise Ata100 Ide Controller Driver

    Click OK NOTE: MAGIC INSTALL will auto detect file path: X:\CODEC\ALC201\SETUP.EXE (for WINDOWS 95/98/98SE/ME/NT4.0/2000) 4-3 Install PROMISE ATA100/RAID Driver (Only for 866AS ULTRA RAID) (Read CD-PACK X:\MANUAL\PROMISE.DOC to get more information) 4-3-1 Install PROMISE ATA100 IDE Controller Driver When the Jumper setting ATA100 you will have next screen in Magic Install MENU. Click PROMISE ATA100 Controller Install PROMISE ATA100 Controller Driver in MAGIC INSTALL MENU...

  • Page 49: Install Promise Ide Raid Controller Driver

    Click Yes to Restart your computer after Driver Install Finish NOTE: The path of the file: For Windows 95/98 is X:\PORMISE\ATA100\WIN95-98 (including Win95/98) For Windows ME is X:\PORMISE\ATA100\WINME For Windows 2000 is X:\PORMISE\ATA100\WIN2000 For Windows NT4.0 is X:\PORMISE\ATA100\NT4 4-3-2 Install PROMISE IDE RAID Controller Driver When the Jumper setting in RAID Mode you will have next screen in Magic Install MENU.

  • Page 50: Install Promise Ide Raid Controller Utility

    For Windows 2000 is X:\PORMISE\RAID\WIN2000 For Novell Netware is X:\PORMISE\RAID\NETWARE 4-3-3 Install PROMISE IDE RAID Controller Utility Click PROMISE RAID Controller In this screen please click Next to install Utility in MAGIC INSTALL MENU PROMISE Monitoring Utility Click Next to continue Setup PROMISE Select the components you want to FastTrak Controller Utility install and click Next to Setup...

  • Page 51: Pc-Health Winbond Hardware Doctor Monitoring Software

    after windows starts After Windows restart click FastCheck Monitoring Utility you can monitor the RAID Status For detail information please read PROMISE.DOC in CD-PACK X:\MANUAL\PROMISE.DOC 4-4 PC-HEALTH Winbond Hardware Doctor Monitoring Software The path of the file is X:\VIA\HEALTH-W\SETUP.EXE (Only support WINDOWS 95/98/98SE/ME) In Windows 95/98 Winbond Hardware Doctor Monitoring Software needs some system files to copy in Utility that’s why it needs install PC-HEALTH twice to complete setup.

  • Page 52: How To Utilize Pc-Health

    3. Click the Button to start installation 4. Select Program Group name or enter a new group name, click continue to setup and click OK after setup complete 4-4-1 How To Utilize PC-HEALTH 2. After executing Winbond Hardware 1. Click Program → Winbond Hardware Doctor it supports system voltage, Fan Doctor →...

  • Page 53: Magic Bios Install Bios Live Update Utility

    4-5 MAGIC BIOS Install BIOS Live Update Utility Click Magic BIOS when Magic Install Click Next to install the Magic BIOS in MENU appears Destination Folder After finish Setup you will have a Double click the Magic BIOS icon you Magic BIOS icon in your screen will have this picture, choose from internet you can upgrade BIOS On-line...

  • Page 54: Pc-Cillin Install Pc-Cillin2000 Anti-Virus Program

    Click Yes if you want to update the BIOS When System programming BIOS don’t turn otherwise choose No to exit off power, after finish update BIOS, the system will clear CMOS and automatically Restart When choose From Local Driver to update 10.
  • Page 55 3. Click NEXT and Enter User Information, 4. Click NEXT and Choose all Internet Click NEXT or choose BROWSE to change Protection the path For the file to be stored 5. Click OK and If You Have Proxy Server, 6. Click NEXT when Start Copy Files, Start to Enter Your Setting install the software 7.

  • Page 56: How To Disable On-Board Sound

    9. Enter Your name and E-mail address 10. After install PC-cillin 2000 complete we Register PC-cillin 2000 or Click Cancel recommend select update item to download Register Later newest virus code and setting Auto refresh virus code 4-7 HOW TO DISABLE ON-BOARD SOUND Enter BIOS SETUP choose INTEGRATE PERIPHERALS choose ON-CHIP DEVICE FUNCTION choose AC97 SOUND DEVICE Disable on-board sound function by press PAGE DOWN KEY to Disable...

This manual is also suitable for:

866as ultra raidJ-866as ultra raid

Table of Contents