Onboard Ide Function - JETWAY 865GFTR3A User Manual

↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

Onboard IDE Function

Please refer to section 3-7-1
Onboard Device Function
Please refer to section 3-7-2
Onboard Super IO Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings
are: PCI Slot, AGP Slot.
3-7-1 Onboard IDE Function
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
OnChip Primary
OnChip Secondary PCI IDE
IDE Primary Master
IDE Primary Slave
IDE Secondary Master PIO
IDE Secondary Slave
IDE Primary Master
IDE Primary Slave
IDE Secondary Master UDMA
IDE Secondary Slave
IDE DMA Transfer Access
IDE 32-bit Transfer Mode
IDE HDD Block Mode
Delay For HDD (Secs)
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
OnChip IDE Primary/Secondary
The integrated peripheral controller contains an IDE interface with support for two IDE channels.
Select Enabled to activate each channel separately. The settings are: Enabled and Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the
four IDE devices that the onboard IDE interface supports.
successively increased performance. In Auto mode, the system automatically determines the best
mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
F6:Optimized Defaults
Onboard IDE Function
PCI IDE Enabled
Enabled
PIO Auto
PIO Auto
Auto
PIO Auto
UDMA Auto
UDMA Auto
Auto
UDMA Auto
Enabled
Enabled
Enabled
0
F6:Optimized Defaults
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
Modes 0 through 4 provide
27
F1:General Help
Item Help
F1:General Help