Table of Contents
Advertisement
(5)
Power Button/ Reset Button/ SPDIF-In (Receiver) Optical Header (7-pin) : JW_FP
SPDIF-In
The SPDIF-In Optical Receiver Connector, by this connector you can in-put digital signal from
other device such like CD-ROM, CD player to get high quality audio.
Power switch: POWER BUTTON
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system
Reset switch lead: RESET BUTTON
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in order
to prolong the lift of the system's power supply. See the figure below.
(6)
External Remote Control Connect Cable Header: JP7
JP7 is for connect External Remote Control, when plug out the connect cable you have to insert
the jumpers in 3-5, 7-9, 4-6, 8-10 otherwise the On board Keyboard and Mouse will not work.
(7)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(8)
LCD Display Panel/ LED Header (2x6pin) : JW_LCD
Power LED: PWR-LED
The Power LED is light on while the system power is on. Connect the Power LED from the
system case to this pin.
IDE Activity LED: HDD_LED, DVD_LED
This connector connects to the hard disk/ CD ROM activity indicator light on the case.
USB2
Pin 1
VCC
VCC
-
-
DATA
DATA
+DATA
+DATA
GND
GND
OC
USB Port Headers
1
2
PO WE R BUTTO N
3
4
5
6
RE SE T BUTTO N
7
Pin 1
JP7
2
VCC
GND
KB-CLK
KB-DATA
EXT-KB-DATA
EXT-KB-CLK
MS-DATA
MS-CLK
EXT-MS-DATA
EXT-MS-CLK
9
10
16
OC (Over Current)
SPDIF VCC
G ND
SPDIF _ IN
Advertisement
Table of Contents
