Onboard Device Function - JETWAY 865GFTR3A User Manual

master driver). If your hard drive and your system software both support Ultra DMA/33 and Ultra
DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support. The
settings are: Enabled, Disabled.

3-7-2 Onboard Device Function

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Onboard LAN Device
Onboard LAN Boot ROM
**AC97 Audio Codec**
AC97 Audio
USB Controller
USB Keyboard Legacy Support
***On-Chip Serial ATA Setting***
On-Chip Serial ATA
Serial ATA Port1 Mode
Serial ATA Port2 Mode
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
AC97 Audio/AC97 Modem
This item is setting on board AC97 Audio/AC97 Modem enabled/disabled. The settings are:
Enabled, Disabled, Auto.
Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a
USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Legacy Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
On-Chip Serial ATA
The settings are: Disabled, Auto, Combined Mode, Enhanced Mode, SATA Only.
Default setting is Auto. Due to the Intel ICH5 Specification limited only provided two
controllers. When plug the Serial ATA hard drive in SATA1 or SATA2 only can support either
IDE1 or IDE2 can works in Windows 9X/ME/2000. But in the Windows XP the OS can
support 6 IDE devices both IDE1, IDE2 and SATA1/SATA2 can works.
3-7-3 Onboard Super IO Function
Onboard Device Function
Enabled
Disabled
Auto
Enabled
Disabled
Disabled
Primary Master
Primary Master
F6:Optimized Defaults
28
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults