Miscellaneous Control - JETWAY 694TAS3A User Manual

During Enabled, it displays information list below. The choice is either Enabled or Disabled
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V (V)
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
CyrixIII Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock Spread Spectrum.
The choice are: Disabled and Enabled.
Host Clock at Next Boot is
This item allows you to step by step setting CPU/HOST Frequency, USE PageDown/ PageUp
key user can change the frequency to approach overclocking.
DRAM Clock at Next Boot is
This item allows you to select SDRAM Frequency to add or to decrease.
3-12 Load Standard/Optimized Defaults
Miscellaneous Control
Default
Enabled
Disabled
66Mhz **
66Mhz
66Mhz **
F6:Optimized Defaults F7:Standard Defaults
40
Item Help
Menu Level >
CyrixIII CPU Ratio
Adjustment
F1:General Help