Install Memory - JETWAY 694TAS3A User Manual

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
CyrixIII Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting
When jumper setting
When jumper setting

2-4 Install Memory

This motherboard provides
sites for memory expansion available from minimum memory size of 32MB to maximum
memory size of 1.5GB SDRAM.
Valid Memory Configurations
Bank
Bank 0, 1 (DIMM1)
Bank 2, 3 (DIMM2)
Bank 4, 5 (DIMM3)
Total
NOTE! Make sure the total installed memory does not exceeds 1.5GB, otherwise the
system may hang during startup.
Miscellaneous Control
Default
Enabled
Disabled
66Mhz **
66Mhz
66Mhz **
F6:Optimized Defaults F7:Standard Defaults
66MHz you can choose 66∼99MHz
100MHz you can choose 100∼132MHz
133MHz you can choose 133∼166MHz
three 168-pin DUAL INLINE MEMORY MODULES (DIMM)
168-Pin DIMM
SDRAM 32, 64, 128, 256, 512MB
SDRAM 32, 64, 128, 256, 512MB
SDRAM 32, 64, 128, 256, 512MB
System Memory (Max. 1.5GB)
Menu Level >
CyrixIII CPU Ratio
Adjustment
12
Item Help
F1:General Help
Total Memory
X1
32MB∼512MB
X1
32MB∼512MB
X1
32MB∼512MB
32MB∼1.5GB