Agp Slot; Connectors, Headers; Connectors - JETWAY 694TAS3A User Manual

This motherboard provides an AGP Slot, support the 1X/2X/4X AGP VGA card.

2-6 Connectors, Headers

2-6-1 Connectors

(1) Power Connector (20-pin block) : POWER
ATX Power Supply connector. This is a new defined 20-pins connector that usually
comes with ATX case. The ATX Power Supply allows to use soft power on momentary
switch that connect from the front panel switch to 2-pins Power On jumper pole on the
motherboard. When the power switch on the back of the ATX power supply turned on,
the full power will not come into the system board until the front panel switch is
momentarily pressed. Press this switch again will turn off the power to the system
board.
(2) PS/2 Mouse & PS/2 Keyboard Connector: PS2KB-MS
The connectors for PS/2 keyboard and PS/2 Mouse.
USB Port connector: USB _ A
(3)
The connectors are 4-pin connector that connect USB devices to the system board.
PIN
1
2
3
4
5
6
7
8
9
10
Pin 1
PS/2 Mouse
PS/2 Keyboard
15
ROW2 ROW1
3.3V 3.3V
-12V 3.3V
GND GND
Soft Power On 5V
GND GND
GND 5V
GND GND
-5V Power OK
+5V +5V (for Soft Logic)
+5V +12V