Configuring A Secured Connection On Multiple Wireless Moderos - AMX Modero NXA-WAP200G Instruction Manual

Wireless Device Communication Setup
FIG. 32 Access Control for Enhanced Security page
process acts to provide further security protocols used by specifying the MAC Addresses of the
wireless devices that can communicate to the WAP200G.
19. Click the Save button to incorporate this new information.
20. Click the Reboot button from the new Temporarily Saved page that appears.
21. Reboot your communicating touch panels.
22. Click OK to reconfirm you want to reboot the WAP200G.

Configuring a secured connection on multiple wireless Moderos

Modero panels share a common Passphrase Generator algorithm that allows an identical
alpha-numeric string to be converted into a series of hexidecimal digits and duplicated exactly
among any G4 panel using wireless communication. Because of this fact, if multiple Modero panels
are being configured for wireless communication to a single WAP200G, it is easier to take the
Current key generated by the panel and manually enter that value into the WEP Key field on the
WAP200G.
1. For each communicating touch panel, complete all of the steps outlined within the previous
Configuring the Modero panel for secured access section on page 32.
2. Navigate back to the Wireless/Secondary Connection page on each panel.
38
Do not enter the MAC Address using any colons.
Those procedures walk you through assigning an SSID, selecting a WEP encryption
level, and obtaining a Current Key string value for a specific WEP Key on a target panel.
Enable Access Control
MAC Addresses of
connected devices
NXA-WAP200G Wireless Access Point