AMX Modero NXA-WAP200G Instruction Manual page 14

WAP200G Accessories
Specifications for NXA-WAP2405A
Dimensions (L & OD):
Description:
Features:
Weight:
Wind Survival:
Max Power:
Frequency Range:
Nominal Gain:
Horizontal Bandwidth:
Vertical Bandwidth:
VSWR:
Mounting Method:
Nominal Impedance:
Polarization:
Cable:
Connector Type:
Operating Temperature:
Certifications:
Included Accessories:
Optional Accessories:
8
• 9.8" L x 1.0" OD (248.9 mm x 25.4 mm)
• 5.5 dBi Rack/Ceiling Mount Omnidirectional Antenna (@ 2.4 GHz).
• 5.5 dBi Omnidirectional Antenna.
• An included 1/4-20 insert allows for easy installation onto ceiling tile rails.
• Optimized radiation pattern focuses energy where it is needed, while at the
same time, suppressing both upper and lower sidelobe energy.
• UL Plenum rated RG58 coax cable and UL94-V0 radome meet the strictest
safety specifications.
• 0.5 lbs (0.23 kg)
• 125 mph (201.17 kph)
• 5 Watts
• 2400-2485 MHz
• 5.5 dBi
• 360°
• 32°
• < 1.5 : 1
• 1/4-20 insert for clipping to a ceiling tile rail.
• 50 Ohm
• Vertical, linear
• 12" (30.5 cm) RG58
• Reverse polarity SMA
• -30°C to 75°C
• FCC (United States)
• CE (Europe)
• A 1/4-20 insert allows for easy installation onto ceiling tile rails.
• NXA-WAP10C - 10' RG-58 Plenum Antenna Extension Cable (FG2255-26)
NXA-WAP200G Wireless Access Point